Banner
Abstract: Ningbo Haishu Gaoqiao Yaosu Mould Manufacturing Factory is a professional auto parts stamping die processing factory, which is mainly engaged in the design, development, customization, wholesale and retailing of auto parts stamping dies. The products are popular in Zhejiang, Anhui, Jiangsu and Shanghai , Zhengzhou, Wuhan, Chongqing and other places.

Auto parts stamping dies

Product Details

In one stroke of stamping, a die for a stamping process is completed. After this project is completed, the product needs to be taken out of the mold manually or with a mechanical hand, and then placed in the next stop of the mold to continue production. Until the last process of the mold is completed, the entire product is considered completed. This is what we call the stamping die for auto parts . This kind of die can be stamped separately when there are few machines and the tonnage of the machine is not enough. The maintenance is also simple, but it is time-consuming and laborious to produce, which requires more labor and time Cost, product scrap rate is higher. Therefore, the single-process mold is generally suitable for the development stage of new products, because the manufacturing cost is lower than the general continuous mold, the processing is convenient, the manufacturing cycle is short, and the product can be produced in a short time. Because of the low production cost and simple maintenance, this type of mold is also very suitable for small batch products. However, after a certain number of products are reached, the single-sequence die cannot fully meet the increasing number. The proportion of machine tools and labor is relatively large, and the production cost is low and the efficiency is low. The above are the advantages and disadvantages of single-sequence mode.


Auto parts stamping dies


Blanking mould
Stretch die

Repair punching die
Full order mold combination



Remarks: Our company's supporting presses have large tables of 1,000 tons, 630 tons, 400 tons, and 200 tons each

Inquiry