Banner
Single order mold

Single order mold

Product Details

Refers to the stamping process of The degree of automation is divided into: manual feeding mold, semi-automatic mold, automatic mold, etc. Bending die, the bending process is a stamping process method of bending the blank into a certain angle and a certain shape of the workpiece through the mold and the press according to the shape of the part. The single-mode die bending die is an important basic equipment for the bending process. The structure of the bending die is similar to the structure of the general punching die. It is divided into upper and lower parts. It is composed of convex and concave dies, positioning, unloading, guiding and fasteners. However, the bending die also has its characteristics, such as convex, In addition to general movements, the concave mold sometimes needs to perform swing, rotation and other actions. The structure of the bending die should be selected according to the shape of the bending piece, accuracy requirements and production batch. Stretching dies: Usually refers to various dies for drawing metal wires, as well as drawing dies for drawing optical fibers. All drawing dies have a hole with a certain shape in the center, round, square, octagonal or other special shapes. When the metal is pulled through the die hole, the size becomes smaller and even the shape changes. In the Ming Dynasty books of Tiangong Kaiwu, we can see the production process of needles, among them the use of wire drawing dies. The drawing die is widely used, such as high-precision wire materials used in electronic devices, radar, television, instrumentation and aerospace, as well as commonly used tungsten wire, molybdenum wire, stainless steel wire, wire and cable wire and various alloy wires are drawn with diamond drawing die As a result, the diamond wire drawing die uses natural diamond as a raw material, so it has extremely strong wear resistance and a very long service life. 3. Turning die: Punch the forming die of the edge of the vertical hole on the semi-finished product with holes pre-made or the plate without holes.

Inquiry